Coding CLIs: Claude Code & Codex

The terminal driver drives any interactive TUI, but two coding CLIs are supported first-class: Claude Code (Anthropic) and OpenAI Codex. The agent operates them the way a developer does — launches the interactive CLI, gives it a task, answers its prompts, and verifies the result — inside the operator-controlled sandbox. A CLI is “first-class” when it has all three pieces below. Adding a third (aider, gemini-cli, …) is a drop-in profile + skill with no engine change — see Adding a platform.

How it works — three layers

Layer	What it does	Where it lives	Who controls it
Skill	Teaches the agent how to drive the CLI — launch, named project folders, slash commands, completion detection, verification.	A bundled `SKILL.md`, seeded to `~/.comis/skills/<id>/`. Auto-loaded when relevant (progressive disclosure).	Comis (shipped)
Platform profile	Tunes how the driver perceives the CLI — render clean-up, classifier patterns, dialog safe-answers. Read-side only.	`platforms/<id>/profile.ts`, selected by the operator `allowId`. See Platform profiles.	Comis (shipped)
Sandbox	The bwrap jail the CLI runs in — filesystem/network/credential/uid scope.	The allowlist entry’s `scope` (below). See Security model.	You (operator)

The skill and profile ship with Comis; your only job is the sandbox — one allowlist entry per CLI, plus installing and authenticating the CLI on the host. The profile is read-side only: it never widens the jail or the launch — that stays your allowlist entry.

Prerequisites (once, per host)

Install the CLI as the service user

Install Claude Code / Codex for the user the daemon runs as (the standard install puts the binary at ~/.local/bin/claude / ~/.local/bin/codex).

Authenticate it OUTSIDE the jail

Run claude / codex login as the service user once so credentials are written to ~/.claude / ~/.codex. The driver never logs a CLI in — an unauthenticated CLI escalates to you. Under filesystem: home those dirs are bound read-write, so the CLI refreshes its own token across drives.

Accept the first-run gates once

Launch the CLI once by hand and clear its startup gates — Claude Code’s “trust this folder” prompt and, under --permission-mode bypassPermissions, the “Bypass Permissions” warning (whose default highlight is “No, exit”, so a reflexive Enter quits). Once accepted, the state is recorded in ~/.claude.json (bound RW), so later drives open straight to the prompt.

Claude Code

agents:
  default:
    skills:
      terminal:
        enabled: true
        allow:
          - id: claude
            match:
              path: /home/comis/.local/bin/claude   # the service user's home-installed binary
              argsPrefix:                            # operator-pinned: the agent CANNOT change the permission mode
                - --permission-mode
                - bypassPermissions
            scope:
              filesystem: home        # binds the home-installed binary + RW ~/.claude state/token
              network: full           # reach the model API directly
              credentialPaths: []      # not needed — filesystem: home already exposes ~/.claude (RW)
              uid: daemon              # run as the daemon user so it owns its (comis-owned) creds
            autoAnswer: safe-only      # auto-answer only known-safe dialogs (the trust gate); everything else escalates
            consent: { acknowledgedRisk: true, acknowledgedAt: "2026-06-17T00:00:00Z" }
            limits: { wallClockMs: 7200000, maxInteractions: 800 }

Why these settings

filesystem: home — Claude Code is home-installed (~/.local/bin/claude → ~/.local/share/...), which filesystem: workspace cannot exec; and it writes ~/.claude (session state + OAuth refresh), which a read-only credentialPaths bind would block.
argsPrefix pins --permission-mode bypassPermissions — the agent drives an allowlisted command, so pinning the permission mode in the operator entry means the agent can never select a weaker/different mode. The jail (uid/network/~/.comis mask) is the real boundary, not Claude’s own permission prompts.
uid: daemon — Claude’s creds under ~/.claude are owned by the daemon user; running as that uid lets it read/refresh them.

How the agent drives it — the agent calls terminal_session_create({ allowId: "claude", command: "claude", project: "<short-kebab-name>" }) (the argsPrefix is prepended automatically), then drives the session per the bundled skill. The project opens a persistent, retrievable folder ~/.comis/workspace/projects/<name> — see Per-project folders. The claude-code profile makes the perception clean:

Render — strips Claude’s dim autocomplete “ghost-text” from the captured screen, so the driving model never mistakes a suggestion (e.g. commit this) for queued input.
Perception — Claude’s spinner reads working; a /model-style picker reads awaiting-input (not stuck).
Dialogs — the “trust this folder” gate is answered with the safe keystroke under autoAnswer: safe-only; any destructive/approval prompt always escalates.

Claude Code’s Bash tool inside the jail. Claude wraps each Bash-tool command in a second bubblewrap that remounts $HOME read-only — which would break its per-command state dir. The driver handles this automatically (a writable tmpfs carve-out at ~/.claude/session-env); no configuration needed. Details: Nested sandboxes.

OpenAI Codex

agents:
  default:
    skills:
      terminal:
        enabled: true
        allow:
          - id: codex
            match:
              path: /home/comis/.local/bin/codex
              argsPrefix:                                    # operator-pinned
                - --dangerously-bypass-approvals-and-sandbox  # disable Codex's OWN approvals + sandbox (it already runs in Comis's jail)
            scope:
              filesystem: home        # binds the home-installed binary + RW ~/.codex state/auth
              network: full           # reach the model API directly
              credentialPaths: []
              uid: daemon
            autoAnswer: safe-only      # the approval overlay is destructive ⇒ ALWAYS escalates (never auto-answered)
            consent: { acknowledgedRisk: true, acknowledgedAt: "2026-06-17T00:00:00Z" }
            limits: { wallClockMs: 7200000, maxInteractions: 800 }

Why these settings

--dangerously-bypass-approvals-and-sandbox — Codex would otherwise start its own nested sandbox (landlock/seccomp) and per-command approval prompts. Nested inside this driver’s bwrap jail, Codex’s sandbox fails to initialize (bwrap: loopback … not permitted / seccomp/landlock … not supported). The flag disables Codex’s redundant layer — Comis’s jail is the sandbox. Without it, a driven Codex session dies at startup.
filesystem: home — same as Claude: a home-installed binary plus a writable cred/state dir (~/.codex).
autoAnswer: safe-only — Codex’s run-command approval overlay is declared destructive in the codex profile, so it always escalates to you and is never auto-answered.

How the agent drives it — terminal_session_create({ allowId: "codex", command: "codex", project: "<name>" }). Use Codex when you specifically want it; otherwise the agent prefers Claude Code for general coding. The codex profile — perception only (Codex’s Working (Ns) line reads working; the /model picker reads awaiting-input); the run-command approval is the escalate-always dialog above. Codex has no /context command (its /status is the usage view), and the skill exits with /quit.

The bundled skills

The agent’s “how to drive it” knowledge ships as two markdown skills, seeded on boot to ~/.comis/skills/claude-code/ and ~/.comis/skills/codex/ (re-seeded when the bundled version changes). The agent auto-discovers them by description (progressive disclosure) and loads the right one for the task — no per-agent skill config is required. Each teaches:

Launch + named project folders — always pass project: "<name>" for retrievable, parallel-safe work.
In-session slash commands — the ones a developer uses: /compact (free context on a long build), /model (a picker — navigate with arrows/number + Enter), /status, /diff, /clear (⚠️ wipes), etc.
Completion detection + verification — read the screen, require a stable idle prompt, then verify the tests actually passed (never assume success).
Ghost-text rule — in a driven session the agent is the sole input source, so any text it didn’t type is the CLI’s autocomplete suggestion — ignore it, never act on it.

Autonomous Builds

Hand the agent a design doc → it drives Claude Code through GSD to build it, phase by phase

Terminal Driver

The full driver reference — tools, sandbox scope, durability, platform profiles

Tool Policy

Control which tools each agent can use

Overview

Tool Guides

Platform Actions

Coding CLIs: Claude Code & Codex

How it works — three layers

Prerequisites (once, per host)

Claude Code

OpenAI Codex

The bundled skills

Autonomous Builds

Terminal Driver

Tool Policy

​How it works — three layers

​Prerequisites (once, per host)

​Claude Code

​OpenAI Codex

​The bundled skills

​Related

Autonomous Builds

Terminal Driver

Tool Policy

How it works — three layers

Prerequisites (once, per host)

Claude Code

OpenAI Codex

The bundled skills

Related